90-DAY MONEY BACK GUARANTEE
50,000+ BOLTS THAT DIDN'T WIN
TRACKED INSURED SHIPPING
90-DAY MONEY BACK GUARANTEE
50,000+ BOLTS THAT DIDN'T WIN
TRACKED INSURED SHIPPING
90-DAY MONEY BACK GUARANTEE
50,000+ BOLTS THAT DIDN'T WIN
TRACKED INSURED SHIPPING
90-DAY MONEY BACK GUARANTEE
50,000+ BOLTS THAT DIDN'T WIN
TRACKED INSURED SHIPPING
90-DAY MONEY BACK GUARANTEE
50,000+ BOLTS THAT DIDN'T WIN
TRACKED INSURED SHIPPING
90-DAY MONEY BACK GUARANTEE
50,000+ BOLTS THAT DIDN'T WIN
TRACKED INSURED SHIPPING
90-DAY MONEY BACK GUARANTEE
50,000+ BOLTS THAT DIDN'T WIN
TRACKED INSURED SHIPPING
90-DAY MONEY BACK GUARANTEE
50,000+ BOLTS THAT DIDN'T WIN
TRACKED INSURED SHIPPING
90-DAY MONEY BACK GUARANTEE
50,000+ BOLTS THAT DIDN'T WIN
TRACKED INSURED SHIPPING
90-DAY MONEY BACK GUARANTEE
50,000+ BOLTS THAT DIDN'T WIN
TRACKED INSURED SHIPPING
90-DAY MONEY BACK GUARANTEE
50,000+ BOLTS THAT DIDN'T WIN
TRACKED INSURED SHIPPING
90-DAY MONEY BACK GUARANTEE
50,000+ BOLTS THAT DIDN'T WIN
TRACKED INSURED SHIPPING
Why This Works When Everything Else Fails
Why Ratchets Fail (And This Doesn't)
A standard ratchet needs 3-5 degrees of swing to engage the next tooth. In a confined space? You might have ZERO degrees.The PRO Offset Extension Wrench uses a continuous chain-drive system—no teeth, no swing arc required. If you can rotate the input 1 degree, the output rotates 1 degree. Period.That means you can use all the swing room at YOUR end (where space is open) to drive the bolt at the OTHER end (where space is zero).
We call it "Remote Torque Transfer." You call it "finally getting that damn bolt out."
The Bolt That Stopped Everyone Else? Not Anymore
Real Reviews From Real People
-
4h ago
I've been wrenching for 35 years. My 5.4L had the dreaded rear spark plug job everyone warns you about. Watched three YouTube videos of guys snapping plugs and pulling the cab off the truck. Bought this thing on a whim and had all 8 plugs out in under two hours. No broken porcelain. No $3,000 head repair. Just me, standing upright, actually enjoying the job for once. My back thanks me.
667
9 Comments
LikeCommentShare -
16h ago
I flip cars on the side. Time is money. This tool paid for itself on the FIRST bellhousing bolt I couldn't reach on a Chevy LS swap. Before, I'd have to pull the crossmember and tilt the whole drivetrain. Now I slide this over the top and I'm done in 10 minutes. Best ROI tool in my box, no question.
1.1k
13 Comments
LikeCommentShare -
2d ago
I'm 62 with arthritis in both hands. I was about to give up wrenching altogether—my knuckles couldn't take the tight spaces anymore. This wrench lets me work from a comfortable position while the tool does the reaching. Got my old Camaro's starter out without a single scraped knuckle. Felt like a young man again.
3.7k
31 Comments
LikeCommentShare -
4d ago
If you own a BMW, you know the transmission bell housing bolts are basically a sick joke from German engineers. I was looking at $400 in shop labor just because I couldn't reach two E12 bolts. This tool slid right in where my hand couldn't fit. Job done. $79 vs $400. You do the math.
4.1k
46 Comments
LikeCommentShare
OUR BIGGEST SALE EVER
OFFER ENDS SOON
SAVE UP TO 30%
NEW YEAR SALE
OUR BIGGEST SALE EVER
OFFER ENDS SOON
SAVE UP TO 30%
NEW YEAR SALE
OUR BIGGEST SALE EVER
OFFER ENDS SOON
SAVE UP TO 30%
NEW YEAR SALE
OUR BIGGEST SALE EVER
OFFER ENDS SOON
SAVE UP TO 30%
NEW YEAR SALE
OUR BIGGEST SALE EVER
OFFER ENDS SOON
SAVE UP TO 30%
NEW YEAR SALE
OUR BIGGEST SALE EVER
OFFER ENDS SOON
SAVE UP TO 30%
NEW YEAR SALE
OUR BIGGEST SALE EVER
OFFER ENDS SOON
SAVE UP TO 30%
NEW YEAR SALE
OUR BIGGEST SALE EVER
OFFER ENDS SOON
SAVE UP TO 30%
NEW YEAR SALE
OUR BIGGEST SALE EVER
OFFER ENDS SOON
SAVE UP TO 30%
NEW YEAR SALE
OUR BIGGEST SALE EVER
OFFER ENDS SOON
SAVE UP TO 30%
NEW YEAR SALE
FAQ
Is it strong enough for stuck bolts?
Is it strong enough for stuck bolts?
Yes — up to 72 Nm of torque. That's plenty for most automotive and mechanical work. For seriously seized fasteners, break them loose first with a breaker bar, then use this to finish the job fast.
Will it fit MY tight spots?
Will it fit MY tight spots?
At only 0.63" thick and 15.4" long, it fits where standard ratchets, wobble extensions, and even flex-head wrenches won't. If there's a straight path to the bolt, this tool can reach it.
Can I use it with an impact wrench?
Can I use it with an impact wrench?
It's impact-compatible for light-to-medium applications. For high-torque impact use, we recommend hand tools to maximize the lifespan of the chain mechanism.
What if it doesn't work for my situation?
What if it doesn't work for my situation?
You're covered by our 60-Day Money-Back Guarantee. Try it. If it doesn't solve your problem, send it back for a full refund. No hassle.
Shipping Times
Shipping Times
- United States, United Kingdom: 7-12 days
- Australia, New Zealand: 4-10 days
- Canada: 7-10 days
Try It Risk-Free for 60 Days
We get it — you've been burned by cheap tools before.
That's why we offer a straightforward guarantee:
If the PRO Offset Extension Wrench doesn't make your next tight-space job easier, send it back within 30 days for a full refund.
No restocking fees. No fine print. No arguing.
Either this tool earns a permanent spot in your toolbox, or you get your money back. Simple.