Focused induction heat helps expand the steel fastener and weaken the bond before you put heavy force on it.

Questions mechanics ask before buying
¿Cómo se usa?
¿Cómo se usa?
1) Enchufe su calentador portátil Padex™ completamente antes del primer uso.
2) Enciéndalo y seleccione su nivel de calor preferido.
3) Colóquelo o sosténgalo cerca del área que desea calentar — ¡disfrute de un confort relajante instantáneo!
¿Cuánto tiempo tarda en calentarse?
¿Cuánto tiempo tarda en calentarse?
El calentador eléctrico portátil se calienta en solo 2-3 segundos, llenando su espacio con un calor agradable y constante casi al instante. Seguro para el uso diario en cualquier lugar donde necesite calor rápido.
¿Es seguro usarlo mientras duermes?
¿Es seguro usarlo mientras duermes?
¡Sí! Cuenta con apagado automático y control de temperatura, para que pueda descansar sin preocupaciones.
Heat the stuck steel fastener before you force it.
Focused induction heat helps loosen rust, corrosion and thread-lock bonds without starting with an open flame.
Before cutting or drilling
Give the metal a better chance to move first.
When a fastener is seized, the expensive part is usually what happens after you force it. Use focused heat before the job turns into extraction.
Why mechanics use heat first
Break the bond before the bolt breaks.
No open flame as the first move when the job is close to hoses, bushings, paint, plastic, or sensitive areas.
It gives you a cleaner first option before the repair turns into extraction, drilling, or replacing extra parts.
Caliente Su Garaje Rápido
Calor alto, poco esfuerzo. Padex convierte los garajes helados en espacios de trabajo cómodos y utilizables con un calor instantáneo y concentrado, diseñado para las condiciones invernales más duras.
|   |
|
Otros |
|---|---|---|
| Calentamiento rápido y potente | ||
| Control de temperatura inteligente | ||
| Rendimiento de eficiencia energética | ||
| Diseño compacto y portátil |
Customer repair notes
The repairs customers mention most.
“I had brake line and rubber close by, so I did not want a torch there. Heated the nut, worked it slowly, and it finally moved.”
“Trailer bolts were rusted from sitting outside. This gave me a cleaner first shot before cutting anything off.”
“Best part is control. The heat goes into the fastener instead of turning the whole area into a fire risk.”
Stop letting one fastener control the whole repair.
Add focused heat before you round the head, snap the bolt, or spend the afternoon drilling out what could have moved with a better first step.